A water heater is an essential appliance in any home, especially during those cold winter months. If you find yourself in need of water heater repair in Mesquite, TX, it’s important to know the signs that indicate you need professional help.
1. Your Water Heater is Leaking
If you notice water pooling around your water heater, this is a sure sign that you have a leak. While a small amount of condensation is normal, large amounts of water can indicate a serious problem.
2. Your Water Heater is Making Strange Noises
It could be an indication that sediment has built up inside the tank and is causing problems. You might hear banging, rumbling, or other strange noises coming from your water heater.
3. Your Water Isn’t as Hot as it Used to Be
If you notice that your water isn’t as hot as it used to be, it could be a sign that your water heater needs to be repaired or replaced. Over time, sediment can build up in the tank and cause problems with the heating elements.
4. You Have Hot Water but it’s Not Lasting Long
If you find that you have hot water for a short period of time and then it turns cold again, this could also be an indication of sediment buildup in the tank. Flushing out the tank can often solve this problem.
5. There is Water Around Your Water Heater
If you see water pooled around your water heater, this is a sign that you have a leak. Check all the fittings and connections to make sure they are tight and not leaking.
6. Your Pilot Light Keeps Going Out
If your pilot light keeps going out, it could be an indication of a draft in the area or a problem with the gas line. You should have a professional inspect your water heater to diagnose the problem.
7. You See Corrosion on Your Water Heater
If there is corrosion, it’s important to have it inspected by a professional as soon as possible. Rust can indicate that the tank is corroding and will need to be replaced. In this case, you need to look out for a new hot water heater installation in Mesquite, TX.
8. You Have an Electric Water Heater and it Trips the Circuit Breaker
If you have an electric water heater and it trips the circuit breaker, it could be a sign of a serious problem. It’s important to have an electrician inspect your water heater to diagnose the problem and make sure it’s safe to use.
If you notice any of these signs, it’s important to call a professional water heater repair company in Mesquite, TX as soon as possible. They can help you diagnose the problem and get your water heater up and running again in no time.
Tips To Maintain Water Heaters:
Perform these maintenance tasks to keep your water heater in tiptop condition and running as efficiently as possible.
- Check the anode rod: The anode rod protects the tank from corrosion. Check it every few years, and replace it if necessary.
- Flush the tank: Over time, sediment can build up at the bottom of the tank and cause problems with the heating elements. To remove sediment, simply open the drain valve and let the water run out until it’s clear.
- Inspect the gas line and pilot light: If your pilot light keeps going out, it could be an indication of a draft in the area or a problem with the gas line. You should have a professional inspect your water heater to diagnose the problem.
- Check the temperature: The water heater should be set to 120 degrees Fahrenheit. Anything higher can cause scalding, and anything lower will result in lukewarm water.
- Inspect the pressure relief valve: The pressure relief valve is a safety feature that releases pressure if it gets too high. Test it periodically to make sure it’s working properly.
If you follow these tips, you can avoid common problems and extend the life of your water heater. But if you do find yourself in need of water heater repair in Mesquite, TX, be sure to call a professional like James Armstrong Plumbing as soon as possible. Contact James Armstrong Plumbing at 214-918-6109 for more information.